Two More Classic Moth Sections in DXF

I keep doodling around with Classic Moth designs. Below are two; a round bilged design loosely based on my Maser and another modified Cates design. These are DXF files which can be imported into various drafting or 3D programs. Hover your mouse pointer over the right corner of the drawing and click on the arrow icon (top right corner of drawing). The drawing will open in another tab on your browser and you can download from there.

Dimensions in both drawings are in meters.

The round-bilged design is a middle of the road design and would fit quite nicely in our wider, flatter, Gen 1 division. Sections are placed (starting at the bow, again all dimensions are in meters) at:

.304	.608	.912	1.216	1.520	1.824	2.128	2.432	2.736	3.040	3.353

The Cates design was the dominant U.S Moth of the 1960s. As Ive been listening to the history of the class, there were many builders that added their own touches to the Cates, pushing the design in various different ways. In this vintage tradition of modifying the Cates, here is one of mine. Ive added a flat rocker panel to bump up the displacement to accommodate  the increased girth of senior skippers. Also, on this version of the Cates, the original Veed transom gives way to a shallow curve. Again, section placement is given in meters.

.030	.100	.250	.550	1.100	1.650	2.200	2.750	3.340

---

Classic Moth plans post.

Related Posts by Categories