Belt up!

Sanding continues on the exterior hull. As I had hoped, things are going quicker than with the interior. This is due to a combination of unobstructed surfaces and the feasibility of using a belt sander. I was able to knock down some nasty drips very quickly with the belt sander, and then went over the hull with the 1/4 sheet orbital and 120-grit paper. Though wet sanding is not called for at this point, I ended up doing a fair imitation of it, what with the heat and all the safety gear on my head. I ended up in some awkward contortions so as to avoid dripping sweat on newly sanded surfaces. Half the hull is now done; another session or two of sanding, and I should be ready to start painting the hull. Total hours 83.75.

Related Posts by Categories